联系我们

KE610系列一体柜变频器

KE610系列综合节能柜由美诺推出。本产品采用先进的同步无速度传感器矢量控制技术，不仅具有变频器的优异控制性能，还结合了注塑机、自动扶梯、中央空调等节能应用的特点。，加强了可靠性和环境适应性，以及定制化和工业化设计，能更好地满足节能应用的要求。

产品特点
规格参数
选型表
经典案例
资料下载

KE610系列集成节能柜变频器的特点

原有节能模式

采用原节能模式，在轻载时，自动降低输出电压，使节能更加高效。

内置电源/节能开关，打造安全可靠的系统

具有切换功能，当节能电路出现故障时，系统可以切换到供电电路，保证生产的连续性。

超高速弱磁控制

采用超高速弱磁控制，最大频率可达3000Hz，便于高速应用。

强大的硬件速度跟踪

具有强大的硬件速度跟踪功能，对大惯性要求快速启动的应用程序响应方便。

瞬时断电不停车

具有瞬时断电不停机的能力，保证瞬时断电时系统不跳闸连续运行。

自动电压调节器

当输入电压波动时，逆变器能自动保持恒定的输出电压。

KE610系列集成节能柜变频器技术条件

Input	Input voltage	3AC 380V±15%
Input	Input frequency	47~63Hz
Output	Output voltage	0～Rated voltage
Output	Output frequency	V/f：0~3000Hz, VC：0~300Hz
Control Feature	Control mode	V/f, SVC, VC, Torque control
	Operation command mode	Keypad control, Terminal control, Serial communication control
	Frequency setting mode	Digital setting, analog setting, pulse frequency setting, serial communication setting, multi-step speed setting & simple PLC, PID setting, etc. These frequency settings can be combined & switched in various modes.
	Overload capacity	150% 60s, 180% 10s, 200% 3s.
	Starting torque	0Hz/180% (VC); 0.5Hz/150% (SVC)
	Speed adjustment range	1:1000 (VC); 1:100 (SVC)
	Speed control precision	±0.5% (SVC); ±0.02% (VC)）
	Carrier frequency	0.5--16.0kHz, automatically adjusted according to temperature and load characteristics
	Frequency accuracy	Digital setting: 0.01Hz Analog setting: maximum frequency ×0.05%
	Torque boost	Automatically torque boost; manually torque boost 0.1%~30.0%
	V/f curve	Three types: straight line, multiple point and square type (1.2 power, 1.4 power, 1.6 power, 1.8 power, square)
	ACC/DEC mode	Linear/S curve; four kinds of ACC/DEC time, range 0.1s~3600.0s
	DC braking	DC braking when starting and stopping DC braking frequency: 0.0Hz~maximum frequency, braking time: 0.0s~36.0s; Braking current: 0.0%~100.0%
	Jog operation	Jog operation frequency: 0.0Hz~maximum frequencyJog ACC/DEC time: 0.1s~3600.0s
	Simple PLC & multi-step speed operation	Max. 16 steps speed running via built-in PLC or control terminal.
	Built-in dual PID	Built-in PID control to easily realize the close loop control of the process parameters (such as pressure, temperature, flow, etc.)
	Automatic voltage regulation	Keep output voltage constant automatically when input voltage fluctuating
Control Function	Common DC bus	Common DC bus for several inverters, energy balanced automatically
	Torque control	Torque control with/without PG
	Torque limit	"Rooter" feature, limit the torque automatically and prevent frequent over-current tripping when running
	Wobble frequency control	Multiple triangular-wave frequency control, special for spinning
	Timing/length/counting control	Timing/length/counting control function
	Over-voltage & overcurrent stall control	Limit current & voltage automatically when running, prevent frequent over-current & over-voltage tripping
	Speed tracking restart	Start the running motor smoothly without impact, protect the safety of motor and load at the most
	Fault protection function	Up to 30 fault protections including over-current, over-voltage, under-voltage, overheating, default phase, overload, shortcut, etc., can record the detailed running status during failure & has fault automatic reset function
Special Functions	Motor switching	Two groups of motor parameters to achieve two motors switching
	Spare part	Braking parts, IO extension card, differential input PG card, open collector input PG card, injection molding machine card, communication card, etc.
	Powerful host software	Support KE600 parameter setting and real-time parameter monitor
Terminals	Input terminals	Programmable DI: 7 on-off inputs, 1 high-speed pulse input, can extend 3 inputs*1 2 programmable AI: AI1: voltage -10～10V A12: voltage 0～10V or current 0/4～20mA
	Output terminals	1 programmable open collector output: 1 analog output (open collector output or high-speed pulse output), can extend 1 output1 1 relay output, can extend 1 output1 2 analog output: 0/4~20mA or 0~10V
	Communication terminal*2	Offer RS485 communication interface, support MODBUS-RTU communication protocol
Human &Machine interface	LED display	Display frequency setting, output frequency, output voltage, output current, etc.
Human &Machine interface	Multifunction key	QUICK/JOG key, can be used as multifunction key
Environment Limit	Ambient temperature	-10℃～40℃, derated 4% when the temperature rise by each1℃ (40℃～50 ℃).
	Humidity	90%RH or less (non-condensing)
	Altitude	≤1000M: output rated power, ＞1000M: output derated
	Storage temperature	-20℃～60℃
	Storage atmosphere	Indoor, without direct sunlight, dust, corrosive gas, combustible gas, oil smoke, vapor, drip, salt, vibration, etc.

公司

迈凯诺KE610变频器在注塑机的应用 2020-07-09

文件名文件格式更新日期资料下载
迈凯诺产品目录 2019-12-05

给我们留言

产品

应用

公司新闻

联系我们